Oven not heating
Element, thermostat, igniter, or control faults can stop heating—diagnosis confirms the real cause.
Need cooking range oven repair in Abu Dhabi? We diagnose the real fault first, fix safely, and test your appliance before we leave—so you can cook with confidence again.
If your oven not heating, your oven not heating evenly, or your stovetop has burners not igniting, our technicians troubleshoot the cause safely and methodically. We also handle gas smell from stove concerns (inspection-first), diagnose oven error codes, and fix related performance issues so your cooker runs reliably again.
What you can expect
Diagnosis-first • Safety-focusedFrom ignition faults and weak flames to uneven heating and control panel issues, we troubleshoot safely, replace only what’s needed, and verify operation before we leave.
Oven not heating
Element, thermostat, igniter, or control faults can stop heating—diagnosis confirms the real cause.
Oven heating unevenly
We check fan circulation, sensor feedback, and heat distribution to improve consistent baking results.
Oven fan not working
Fan motor, capacitor, wiring, or control issues can impact airflow and cooking consistency.
Stove burner not igniting (spark clicking)
We inspect igniters, electrodes, caps, and gas flow to restore safe ignition.
Weak flame / flame goes out
We check burner ports, regulators, and airflow issues that can cause weak or unstable flames.
Gas smell (stop-use guidance)
If you smell gas, stop using the appliance and request an inspection.
Read safety guidanceIgnition keeps clicking
Continuous clicking can point to moisture, misalignment, or ignition switch faults.
Door not closing / seal issue
Worn seals and hinges can leak heat and cause longer cooking times.
Control knobs not working properly
Loose shafts, worn switches, or control modules can affect temperature and burner control.
Error codes / control panel faults
We interpret fault codes and test sensors, boards, and connections to pinpoint failures.
Grill/broil not working
We check upper elements, igniters, relays, and control settings that affect broil performance.
Electric oven trips breaker / no power
We isolate power, test circuits safely, and identify shorts, loose wiring, or failing components.
We focus on observable symptoms and safe checks—so you get a clear explanation of what failed and what is worth fixing, without guesswork.
Ignition & burner behavior
We observe spark, ignition timing, and flame stability to narrow down the ignition path and gas flow symptoms.
Oven heating behavior
We check heat-up performance, uneven heating symptoms, and whether fan circulation is working as expected.
Door seal & heat loss signs
We inspect sealing, hinge alignment, and heat leakage indicators that can reduce temperature stability.
Root cause first
We confirm the fault path before recommending parts, so you’re not paying for guesswork.
Temperature control signals
We evaluate sensor/thermostat behavior and control response to improve stable temperature regulation.
Power & wiring safety
For electric ovens, we isolate power where required and check for trip/no-power symptoms safely.
Gas-related signs (handled safely)
We check appliance-side symptoms and advise the safe next step if a sealed/regulated gas issue is suspected.
These are practical “stop-use” signs for gas and electric cooking appliances. If you notice any of the issues below, switch the appliance off, avoid repeated restarts, and arrange an urgent inspection.
A few simple habits can reduce ignition faults, uneven heating, smoke, and premature wear—especially in busy kitchens.
Helpful for Abu Dhabi homes where cooking oils + dust can affect burner ports and ventilation—regular light cleaning keeps ignition and airflow more stable.
We provide on-site cooking range and oven repair across Abu Dhabi neighborhoods—quick troubleshooting, clear recommendations, and safe testing after the fix.
Pricing depends on the fault type, appliance setup, and whether parts are required. Below are the most common factors we use to scope work accurately.
Different faults require different testing steps and access points. For example, ignition and burner faults often focus on safe flame/igniter checks, while temperature control faults may involve sensor/thermostat behavior and control response.
Gas and electric units can require different safe-isolation steps and access methods. The appliance layout (built-in vs freestanding) can also affect time needed to reach components for testing.
If a part is needed, final cost can depend on availability and compatibility (for example: igniters, thermostats, fans, door seals, or control modules). We share options before proceeding.
If you book an urgent visit (for example: gas smell concerns, repeated breaker trips, or overheating symptoms), scheduling and prioritization can affect service cost.
Diagnosis first: we identify the fault, explain the options, and share the next steps before starting any repair.
Practical diagnostics, safety-first handling, and clean, tested repairs—built for busy Abu Dhabi kitchens.
Explore our full appliance repair coverage. Choose a service below to view common issues, what we fix, and service details.
One hub for major home appliance services in Abu Dhabi
Appliance Repair Hub
AC Repair in Abu Dhabi
Washing Machine Repair
Dryer Repair
Fridge & Freezer Repair
Dishwasher Repair
Cooking Range & Oven Repair
Microwave Repair
Water Heater Repair
Kitchen Hood Repair
Small Appliance Repair
Quick answers to common heating, ignition, and safety questions. If you’re unsure, it’s safest to book an inspection.
It can be caused by a temperature control issue, heating element/ignition fault, sensor behavior, fan circulation problems, or a door seal leaking heat. A proper diagnosis checks how the oven responds and whether heat is distributed normally.
Uneven heating is often linked to fan circulation faults, temperature sensor/thermostat behavior, heat loss through a worn door seal, or blocked airflow inside the cavity. We test heat distribution and fan operation during diagnosis.
Typical causes include clogged burner ports, moisture/grease buildup, an igniter issue, or inconsistent gas flow at the burner. We check spark behavior and flame stability safely and recommend the best next step.
Continuous clicking may happen if the igniter is damp/dirty, the burner cap is not seated correctly, or the ignition sensing is not detecting a stable flame. If clicking continues with no flame, stop and book a check.
Stop using the appliance immediately, ventilate the area, and avoid switching electrical devices on/off. Book an urgent inspection for safe assessment of the situation.
Breaker trips can happen from a short, damaged wiring, a faulty heating component, or moisture near electrical parts. For safety, stop using it and let a technician isolate power and test correctly.
Yes. We provide on-site cooking range and oven diagnostics and repair across Abu Dhabi. You can confirm coverage and booking slots during scheduling.
Yes. After repair, we check basic operation such as burner ignition, flame stability, and oven heating behavior where safe and appropriate.
Clear access around the cooker/oven, note any error codes, and share symptoms (not heating, uneven heating, clicking ignition, breaker trips). If there’s a gas smell, stop using it and ventilate the area.
Cost depends on the fault type, whether it’s a gas or electric model, access/diagnosis complexity, and whether parts are required. We explain the findings and options before any repair begins.
Safe, practical guidance: we focus on correct diagnosis, clear recommendations, and testing after repair—without unsafe shortcuts.
If your kitchen appliance isn’t heating, ignition keeps clicking, or the breaker trips, book cooking range oven repair in Abu Dhabi and get a safety-first diagnosis with clear next steps.